Why do you need to wear an anti-static microporous coverall when working in an electronics factory?

I believe that workers who have worked in electronics factories must be familiar with anti-static microporous coveralls. So do you know why anti-static microporous coverall is required for work in electronics factories?

First of all, static electricity is harmful to any electronic product and has a great impact, so the top priority of the electronic processing industry is to be able to effectively release static electricity. Circuits are very sensitive to static high voltage. When people or objects with static electricity touch these devices, static electricity will be released. When static high voltage impacts the circuit, the internal oxide film will be broken down and destroyed, causing the electrical device to be damaged on the spot or malfunction.

Of course, devices that have been subjected to static discharge will not malfunction immediately, which is why most people did not pay attention to static protection in the past. In addition, static electricity can also cause harm to the human body, so it must be highly valued. In special working environments, we must pay attention to personal safety and not hurt ourselves, so we must wear a full set of anti-static protective equipment and do a good job of safety protection.

An antistatic microporous coverall is a fabric made by mixing conductive fibers or antistatic synthetic fibers or a mixture of the two when making fabrics. It can also be a fabric treated with antistatic properties. Antistatic microporous coveralls can effectively prevent the accumulation of static electricity and prevent accidents. Therefore, when purchasing antistatic work clothes, you must find a regular work clothes manufacturer.

Antistatic clothing is a blend of artificial fibers and conductive fibers, with excellent and lasting conductive properties. Antistatic clothing is a necessary measure for antistatic clothing. The work clothes have a charge of <0.6 microcoulombs/piece and a charge surface density of <7 microcoulombs/square meter.

We should pay attention to the following points when wearing antistatic clothing:
1. It is forbidden to wear and take off antistatic clothing in flammable and explosive places;
2. It is forbidden to attach or wear any metal objects on antistatic clothing; when wearing antistatic clothing, it must be worn with antistatic shoes specified in GB4385, as well as corresponding antistatic head covers and antistatic gloves.
3. When wearing antistatic clothing, it should also be matched with antistatic shoes, and the ground should also be an antistatic floor with a grounding system